Skip to main content
Skip to main content
Tampa skyline
Outdoor Living & Hardscapes in Tampa

How Much Does a Concrete Patio Cost in Tampa?

$3,326typical · fair range $3,018 to $3,676

That is the modeled cost to deliver plus a fair contractor margin for outdoor living & hardscapes in Tampa, not a sales quote. Built from BLS wage data, Craftsman bills of materials, and verified permit fees. 2026-07-21

Got a contractor quote? Check it against this number
$
Show the math
How $3,326 is built
Labor$716
Materials$1,431
Direct cost$2,147
Overhead (19% of revenue)$633
Cost to deliver (break even)$2,780
Contractor margin (16.4%)$546
Typical fair price$3,326

The margin is the gap between break even and a typical quote, not a markup we invent. A fair margin floats by trade and market, most landing at a 15 to 22 percent margin on the bid, about 18 to 28 percent over the cost to deliver, and nobody works for free. Full methodology.

$3,326
Typical installed
20.5hrs
Skilled labor
16.4%
Contractor margin
10.7% under
vs national avg
Bid Fairness Checker

Is your outdoor living & hardscapes bid fair?

Cost index by David Olson · reviewed by Leonard "Chuck" Thompson · 2026-07-21
Independent FatBook v3 cost indexVerified permit/source data where availableReviewed by Leonard "Chuck" Thompson
$
Type the number off the estimate, or drag the bar. The gauge below shows where it lands.
Or
Upload contractor estimate
Drag and drop or click here. PDF or CSV, we extract the line items.
Or paste it
Analyzed estimates are stored anonymized (names, addresses, phone numbers, and emails stripped) to improve the benchmark. No account, no tracking.
Tampa
Within the fair range.
Fair range
Fair range$3,018 to $3,676
Typical market bid$3,326
Lowest realistic price$3,018
Your bid$3,326
Gap to the price floor$308
Contractor margin16.4%
Fair range. Break-even sits at the red line: the cost of delivering the job, not a price anyone should demand. The green band above it is fair territory: most solid bids land at a 15 to 22 percent margin on the bid, roughly 18 to 28 percent over the cost to deliver, leaner or richer by trade and market. That band is earned money. No one works for free, and if the job were easy you would not be hiring it out.
True Cost Calculator

Calculate your Tampa true cost.

sq ft
Technical Blueprint LIVE SCHEMA
Outdoor living estimate schematic FORMBOARD FRAME 4" SLAB DEPTH Concrete slab footprint: -- sq ft
True Cost Benchmark
$3,326
Typical range: $3,018 to $3,676 · Lowest realistic price: $3,018
Labor$716
Materials (PPI-adjusted)$1,431
Overhead (19%)$633
Cost to deliver$2,780
Labor derivation: 20.5 Craftsman hours × $25.32/hr BLS wage × 1.38 burden = $716.
Potential savings $308. That is the gap between the true cost benchmark and the lowest realistic price.
Good news for Tampa homeowners: outdoor living & hardscapes work here averages $3,326, running 10.7% below the national benchmark. Margins (16.4%) are in the normal range. This is a buyer-friendly market overall, though the $308 gap between average and floor prices means there's still meaningful room to negotiate.
Standard market dynamics. Tampa runs 16.4% margins with a normal spread from $3,018 to $3,676. You have about $308 in negotiating room. The most effective approach: get three quotes, identify the line items where they differ most, and negotiate those specific items down toward the floor of $3,018.
When you book matters. The cheapest stretch to hire for outdoor living & hardscapes in Tampa is winter (December through February), when crews have gaps to fill and price closer to the $3,018 floor. Wait out the warm-weather stretch (April through October), when everyone calls at once and bids climb toward $3,676. The seasonal swing runs 5 to 12 percent, which is $166 to $399 on a job this size.
With $308 between the average and the floor, Tampa has a relatively modest negotiation window, about 9% of the total job cost. This doesn't mean negotiation is pointless: on a $3,326 job, even 9% savings is real money. But the bigger wins here come from scope optimization and timing, not from beating contractors down on price.
Tampa is among the most affordable metros in our outdoor living & hardscapes index, cheaper than 23 of 25 tracked markets. Lower regional labor costs are the primary driver. Affordable does not mean no room to negotiate: the 16.4% margin still represents $308 between the average quote and the floor.
Show the math: how Tampa Concrete Patio Installation numbers are derived Click to expand
Derivation for Tampa, Concrete Patio Installation · updated 2026-07-21
Step 1: Craftsman labor hours
BOM hours from Craftsman National Estimator: 20.5 hrs (typical project: 400 sq ft)
Step 2: BLS wage × burden
Tampa wage from BLS OES: $25.32/hr
Burden rate (FICA + workers' comp + insurance + unemployment): 37.9%
loaded_wage = $25.32 × 1.3789 = $34.91/hr
Step 3: Labor cost
labor = 20.5 hrs × $34.91/hr = $716
Step 4: Materials (PPI-adjusted)
Craftsman material cost × FRED PPI multiplier (1.0185): $1,431
Materials carry no markup here. Book prices get adjusted to the current market with producer price indexes.
Step 5: Permit fee
Tampa: $0
No standalone permit line in the model for this scope in Tampa. Common exemptions cover cosmetic and finish work and in-kind replacement, but some cities charge separate flat-fee trade permits instead, so confirm with the local permit office. Source: our compiled city fee schedules.
Step 6: Direct cost
direct = labor + materials + permit = $716 + $1,431 + $0 = $2,147
Step 7: Overhead
NAHB benchmark: overhead is 19% of revenue, the way the NAHB Cost of Doing Business study measures it. Materials pass through at cost and carry no overhead.
overhead = ~19% of revenue (NAHB basis) = $633
Step 8: Cost to deliver
cost_to_deliver = direct + overhead = $2,147 + $633 = $2,780
What it actually costs a contractor to do this job in Tampa, before profit.
Step 9: Lowest realistic price
Cost to deliver plus the leanest sustainable margin in Tampa for this scope: $3,018
The floor clears cost-to-deliver, as it should: nobody stays in business below break-even.
Step 10: Typical contractor quote
The modeled typical quote in Tampa, cost to deliver plus the market's usual margin: $3,326
Step 11: Contractor margin
margin = ($3,326 - $2,780) / $3,326 × 100 = 16.4%
The portion of the typical quote that is not cost-to-deliver. Higher = more room to negotiate.
Step 12: Savings potential
savings = $3,326 - $3,018 = $308
The gap between the typical quote and the lowest likely estimate in Tampa.
One parts list prices every service in every metro. Sources: BLS OES wages, FRED PPI series, Craftsman National Estimator, city permit offices. Updated 2026-07-21. Full methodology →
How the cost breaks down
Where the money goes

What you pay for in Tampa.

Every outdoor living & hardscapes dollar in Tampa, split into labor, materials, permit, overhead, and the contractor margin. The first four are the cost to deliver. The margin is what a fair job earns on top.

Labor$716 (21.5%)
Materials$1,431 (43%)
Overhead$633 (19%)
Margin$546 (16.4%)
Cost to deliver plus a fair margin = $3,326
A outdoor living & hardscapes job in Tampa
Fig. Outdoor Living & Hardscapes work in Tampa — the 20.5 hours priced above.
Cost by size

What concrete patio installation costs at your size.

Scales with project area at this metro's rate. The calculator lets you dial in your exact size.

SizeTypicalRange
250 sq ft$2,363$2,144 to $2,611
300 sq ft$2,684$2,435 to $2,966
400 sq ft$3,326$3,018 to $3,676
500 sq ft$3,968$3,600 to $4,386
600 sq ft$4,610$4,183 to $5,095

Scaled from TheFatBook's per-size cost model, the same one behind the calculator.

The Tampa guide

Tampa sits 10.7 percent below the national average for concrete patio work. That $3,326 city average for a concrete patio feels almost reasonable until you see the floor at $3,018. I built this cost index from Craftsman hours, BLS wages, FRED material prices and verified local inputs so you can tell the difference between honest pricing and extra fat.

Cost Data Summary
City average
$3,326 for concrete patio installation, 10.7% below the national average of $3,726 (TheFatBook cost index, 2026)
Bid range
$3,018 low to $3,676 high, with the lowest realistic price at $3,018 (TheFatBook cost index, 2026)
Contractor margin
16.4% contractor margin, with $308 between average price and floor (TheFatBook cost index, 2026)
Labor hours
20.5 hours for concrete patio installation (Craftsman, 2026)
Labor cost
$34.91/hr loaded wage ($25.32 base + 37.89% burden) (BLS OEWS, 2026)
Materials
$1,431 material cost (PPI adjusted) (FRED PPI, 2026)
Permit fee
$0 (no standalone permit for this scope; local taxes or trade fees may still apply at issuance) (PermitCalculator, 2026)
Overhead
$633 overhead allocation (NAHB, 2026)
Cost to deliver
$2,780 fully loaded, before the contractor's margin (TheFatBook cost index, 2026)

Local Market

Tampa concrete patio installation runs $3,326 on average (TheFatBook cost index, 2026). That sits $400 under the national figure because labor supply stays healthy despite 7.6 percent population growth. TheFatBook Cost Index puts 20.5 Craftsman hours against a loaded wage of $34.91 per hour from BLS OEWS data. Materials land at $1,431 after FRED PPI adjustment while overhead adds $633 from NAHB benchmarks. Florida building codes push some exterior budgets higher with wind and flood rules. Concrete patios dodge the worst of those impact resistant premiums though. The insurance crisis still matters here. Homeowners now pay out of pocket for upgrades that used to ride on claims so overall renovation budgets feel tighter. That $2,780 cost to deliver reflects real local inputs. Not every bid above it earns the full spread.

Chuck's Take

about sixteen percent margin in Tampa doesn't shock me. With about eight percent growth and plenty of rental flips the good crews stay busy. They earn every bit of that spread when they show up with the right forms and finish the pour before the next thunderstorm rolls in. Take a bid near the floor and make sure the guy has insurance. Low numbers sometimes mean he skips the proper crew.

Understanding Your Bid

Your Tampa bid for concrete patio work should sit near $3,326 (TheFatBook cost index, 2026). Anything over $3,676 starts to look rich given the verified floor of $3,018. The 16.4 percent contractor margin on this trade comes from the gap between that average and the $2,780 cost to deliver. Not all of it's pure profit. Some covers risk in a hurricane prone market. The $308 spread between average and floor gives you real room to negotiate without insulting a good crew. I see bids that ignore the zero permit line and still pad the total. Others roll in extra for rainy season delays that rarely hit a 400 square foot pour this hard. Run your number through the Bid Fairness Checker on this page. It takes sixty seconds and shows exactly where your quote lands against TheFatBook Cost Index.

Cost Breakdown

The numbers break down cleanly in our data. 20.5 Craftsman hours at the local loaded wage of $34.91 per hour produce $716 in labor (Craftsman, 2026). That loaded rate already folds in the 37.89 percent burden on the $25.32 base from BLS. Materials add $1,431 straight from FRED PPI tracking. The permit line shows zero in TheFatBook Cost Index (built from BLS wage and Craftsman labor data) for a standard concrete patio though your inspector may still collect minor trade fees at the counter. Overhead allocation sits at $633 per NAHB benchmarks. Add it all up and you get the $2,780 cost to deliver. Everything above that line is margin. The verified floor of $3,018 builds in the leanest sustainable margin for this work in Tampa. Bids near the $3,676 high end usually carry fat that has nothing to do with hurricane readiness or material quality. The True Cost Calculator lets you adjust square footage and see how each line item shifts.

Chuck's Take

about twenty one hours for a four hundred square foot patio sounds about right to me. I've poured plenty that size. The about fourteen hundred in materials tracks with what supply houses charge around here. When that number jumps much higher the contractor is probably buying retail instead of from his regular yard. Ask him straight where he gets his ready mix.

How to Negotiate

Shop your concrete patio project in the drier months between November and April. Hurricane season uncertainty tightens schedules and pushes prices up after June. Get bids early in the week when crews still have open slots. Before you call any contractor back run your number through the Bid Fairness Checker on this page. It shows instantly whether that quote sits closer to the $3,326 average or the $3,018 floor. Tell the contractor you understand local labor runs about thirty five dollars loaded and materials track with national indexes. Ask what his crew size looks like for a four hundred square foot pour and how he handles rain days. A fair bid leaves him room above the $2,780 cost to deliver without stretching into luxury markup territory. The $308 potential savings is real money but only if you treat the contractor like a partner instead of an adversary.

Chuck's Take

Do your bidding before June if you can. Once hurricane season talk starts every concrete crew gets jumpy about scheduling. A fair price near about three thousand sits fine if the man explains his crew size and rain plan. Throw him the Bid Fairness Checker number and watch how fast he adjusts. Honest guys move quick when the data lines up.

What Makes This Market Different

Tampa's median home value sits at $887,400 yet half the households don't own their place. That 49.8 percent ownership rate plus steady 7.6 percent population growth creates odd pressure on concrete patio budgets. Contractors here chase rental property owners who want quick returns on patios that boost nightly rates. At the same time the 1982 median house age means many properties already carry dated drainage that must be fixed before new concrete goes down. TheFatBook Cost Index (built from BLS wage and Craftsman labor data) captures this tension. So the $3,326 average for a concrete patio beats the national number by a decent margin but the floor at three thousand fourteen dollars still feels tight for a market where insurance costs keep shifting more expenses onto homeowners. I keep seeing bids that bundle in extra for code compliance that this scope rarely triggers. The zero permit line in the data should help keep things honest yet some contractors still treat every outdoor job like it needs full hurricane hardening. That inflates the high end to $3,676. Not every patio needs to survive a direct hit.

Frequently Asked Questions

How much does concrete patio installation cost in Tampa?
According to our local Cost Index concrete patio installation in Tampa averages $3,326 for four hundred square feet. The lowest realistic price sits at $3,018 while the high end reaches $3,676. Use the True Cost Calculator on this page to adjust for your exact size and finishes.
What's a fair markup for concrete patio work in Tampa?
Our proprietary cost database shows typical contractor margin at 16.4 percent on concrete patio work. That leaves $308 of potential savings between the $3,326 average and the $3,018 floor. Not every bid above the cost to deliver of $2,780 is unfair but anything over $3,676 usually carries extra fat.
Does Tampa require a permit for a concrete patio?
TheFatBook Cost Index (built from BLS wage and Craftsman labor data) shows a zero standalone permit fee for this scope though local taxes or minor trade fees can still apply. According to our data the $0 permit line helps keep the floor at $3,018. Always confirm with your contractor whether any paperwork will hit the final bill.
How does hurricane season affect concrete patio bids in Tampa?
Hurricane season creates real scheduling pressure that pushes some concrete patio bids higher after June. Our local Cost Index still holds the concrete patio average at $3,326 with a floor of $3,018 because labor supply stays solid. Factor in the narrower dry work windows and get bids completed well before summer storms arrive.
How this number is calculated

TheFatBook models outdoor living & hardscapes from Craftsman labor hours, BLS regional wages, burden, PPI-adjusted materials, permit data where available, and contractor overhead benchmarks. Cost index version: 2026-07-21. Updated Jul 2026.

Sources: BLS, Craftsman, FRED
Reference URLs: BLS OEWS · FRED PPI
Reviewed by: Leonard "Chuck" Thompson
Read methodology →
Sources & methodology for these numbers
  • Independent FatBook v3 cost index for Outdoor Living & Hardscapes in Tampa.
  • BLS OEWS wage inputs (https://www.bls.gov/oes/) and FRED PPI material inflation (https://fred.stlouisfed.org/) references.
  • Craftsman labor-hour references and contractor overhead benchmarks.
  • Verified permit/source data from PermitCalculator.com and permits_compiled where available.
Cost-index version: 2026-07-21
Updated: Jul 2026
Sources: BLS, Craftsman, FRED
Reviewed by: Leonard "Chuck" Thompson
Estimate Scope

What the outdoor living & hardscapes in tampa benchmark includes.

Included in the benchmark
  • Concrete Patio Installation as the headline cost-index scope
  • labor-hour assumptions, regional wage inputs, materials, overhead, and permit data where available
  • low, average, high, lowest realistic price, margin, and savings benchmarks from the FatBook cost index
Not included automatically
  • hidden damage, change orders, emergency service premiums, or unusual site access conditions
  • contractor financing approval, warranties, provider recommendations, or guaranteed final quotes
  • permit rulings for a specific address unless the city permit panel lists verified local data
Scope methodology →
Tampa Service Pricing
ServiceLowAverageHigh
Concrete Patio Installation · 400 sqft$3,018$3,326$3,676
Concrete Driveway Installation · 400 sqft$3,113$3,419$3,747
Concrete Sidewalk Installation · 400 sqft$3,243$3,562$3,905
Stamped Concrete Patio · 400 sqft$4,481$4,939$5,451
Concrete Slab (Garage/Addition) · 400 sqft$3,142$3,450$3,782
Concrete Driveway Replacement · 400 sqft$5,231$5,753$6,315
Concrete Slab Demolition$1,299$1,418$1,694
Retaining Wall Installation · 400 sqft$6,015$6,629$7,319
Paver Patio Installation · 400 sqft$3,927$4,328$4,781
Paver Driveway Installation · 400 sqft$7,519$8,287$9,148
Asphalt Driveway Installation · 400 sqft$4,125$4,546$5,026
Deck Demolition$1,663$1,803$1,958
Deck Construction Pressure Treated · 240 sqft$5,619$6,180$6,785
Deck Construction Cedar · 240 sqft$8,664$9,537$10,476
Deck Construction Composite · 240 sqft$9,118$10,037$11,027
Deck Railing Installation · 40 linear ft$1,389$1,519$1,658
Pergola Installation · 100 sqft$4,110$4,518$4,956
Patio Cover Installation$4,860$5,343$5,864
Deck Repair$1,390$1,532$1,824
Wood Privacy Fence Installation · 150 linear ft$4,224$4,643$5,094
Vinyl Fence Installation · 150 linear ft$6,600$7,274$8,022
Gazebo Installation$5,568$6,124$6,723
Shed Installation$3,842$4,222$4,631
Fire Pit Installation$1,545$1,703$1,897
Outdoor Kitchen Installation$5,900$6,490$7,126
Outdoor Living & Hardscapes Cost Guides

Before you get bids in Tampa.

Specialty tool
Concrete cost calculator
Installed slab, driveway, and patio pricing for your metro, plus bag and ready-mix math for a DIY pour.
Open concrete cost calculator →
Permit Information

Tampa permits.

Structure
Separate flat fees for building, electrical, mechanical, plumbing trades. All subject to FL Building Permit Surcharge (2.5%).
Department
City of Tampa Development & Growth Management
Official Source
Verified
2026-03-23
Fee Anchors
$8k building fee: $124
$12k building fee: $124
$25k building fee: $124
Electrical base: $124
Plumbing base: $124
HVAC base: $124

Source-backed permit facts from PermitCalculator.com and the underlying permits_compiled dataset. Always confirm final requirements with the local building department before filing.

Upload Estimate

Got a bid? We'll check it.

Upload a contractor estimate
Drag & drop or click to upload. We'll analyze every line item.
PDF · CSV · JPG · PNG · Max 10MB
Financing

Payment options.

$
%
yr
%
Best financing option
-
Also in Tampa: 5 other trades
Check a Tampa quote
See if your quote falls within the verified fair range for Tampa.
Run the Calculator →
Compare nearby markets
Atlanta
$3,528 avg · $393 potential savings
Austin
$3,561 avg · $442 potential savings
Boston
$4,374 avg · $453 potential savings
Charlotte
$3,494 avg · $371 potential savings
View all 25 cities →
DO
Cost index built by David Olson, Creator of the Cost Index & Permit Dataset · Methodology reviewed by Leonard "Chuck" Thompson, LC Thompson Construction Co., Owner (retired) · 2026-07-21
Check my bidCalculate true costUpload estimate